TSFH - HIGH CAPACITY MANUAL TEST STAND - MARK-10 Vietnam

A wide range of force gauges and gripping fixtures Digital travel display >> 6" [152 mm] travel, 0.0005" [0.01 mm] resolution, SPC output for automated data collection. For output of travel data to a PC, the following items are required: 09-1066 cable and MRS100A communication adapter. Note: continuous data output rate is limited to 2 Hz. Horizontal / wall mounting kit Set of mounting legs that attach to the test stand column in place of the base Column extension Column can be extended to custom lengths (see Ordering Information) << Eye End Adapters Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges

Mark-10 force gauges with data output include a USB cable, which can be connected directly to a PC.

If the TSF001 digital travel display option is ordered and connection to a PC is desired, the following connection cables are required:

Travel display (Mitutoyo) <=> 09-1066 cable, Mitutoyo <=> MRS100A converter, Mitutoyo to RS-232 <=> RSU100 converter, RS-232 to USB (optional)

Ordering information for these accessories can be found here.

Model	Description
TSF	Test stand, 1,000 lbF, vertical
TSFH	Test stand, 1,000 lbF, horizontal
TSF001	Digital travel display for TSF/TSFH
TSF002	Horiz. / wall mounting kit for TSF Series and TST Series stands
AC1004	Mounting kit, Indicator to test stand
---	Column extension

The TSF / TSFH is supplied with four hooks (small, medium, large, and extra large), 1/2-20F adapter plate, 2" and 3" compression plates, two couplers (#10-32 coupler and 5/16-18), and wrench set.

TSF

TSFH

Trịnh Nguyễn Thanh Thủy 
===============================
[Hotline] + 84 1654 926 912

               + 84 91.663.5500
[email] thuy@songthanhcong.com

[Skype] thanhthuytxt

[Yahoo] thanhthuytxt92

TSC1000H - MANUAL TEST STAND - MARK-10 Vietnam

The TSC1000 Force Measurement Test Stand is ruggedly built for testing up to 1,000 lbF (5 kN) of compression or tension force. A large hand wheel requires little effort, even at high loads, and a precision Acme screw and nut ensure smooth operation over time. The stand includes a loading table with threaded holes for fixture or grip mounting and a solid metal base contains a storage pocket and holes for bench mounting. Available in vertical and horizontal orientations.		Maximum force: 1000 lbF [5 kN] Maximum travel: 3.5" [89 mm] Compatible with all Mark-10 force gauges,accessories and grips Mounting holes for bench mounting Loading table with 25 #10-32 UNF holes for fixture mounting Precision Acme screw and nut Optional digital travel display
Data Sheet  User's Guide  Stand Comparison Chart

A wide range of force gauges and gripping fixtures Digital travel display >> 6" [150 mm] travel, 0.0005" [0.01 mm] resolution, SPC output for automated data collection. For output of travel data to a PC, the following items are required: 09-1066 cable and MRS100A communication adapter. Note: continuous data output rate is limited to 2 Hz. Horizontal / wall mounting kit Set of mounting legs that attach to the test stand column in place of the base Column extension Column can be extended to custom lengths (see Ordering Information) << Eye End Adapters Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges

Mark-10 force gauges with data output include a USB cable, which can be connected directly to a PC.

If the TSC001 digital travel display option is ordered and connection to a PC is desired, the following connection cables are required:

Travel display (Mitutoyo) <=> 09-1066 cable, Mitutoyo <=> MRS100A converter, Mitutoyo to RS-232 <=> RSU100 converter, RS-232 to USB (optional)

Ordering information for these accessories can be found here.

Model	Description	US Price
TSC1000	Test stand, hand wheel-operated, 1,000 lbF, vertical
TSC1000H	Test stand, hand wheel-operated, 1,000 lbF, horizontal
TSC001	Digital travel display for TSC1000/TSC1000H
TSA002	Horizontal/wall mount kit for TSA/TSC1000
AC1004	Mounting kit, Indicator to TS-Series test stands
---	Column extension

The TSC1000 / TSC1000H is supplied with a tool kit, medium hook, large hook, 2" diameter compression plate, and 1/2-20F adapter plate.

TSC1000

TSC1000H

Trịnh Nguyễn Thanh Thủy 
===============================
[Hotline] + 84 1654 926 912

               + 84 91.663.5500
[email] thuy@songthanhcong.com

[Skype] thanhthuytxt

[Yahoo] thanhthuytxt92

ES05 - Test stand, lever-operated, compression, 30 lbF - MARK-10 Vietnam

The compact ES05 test stand is designed for compression testing of up to 30 lbF (150 N). Typical applications include switch contact activation testing, small spring testing, peel testing, and more. A spring-loaded lever allows for repeatable testing with up to 1.5” (38 mm) displacement. The lever mechanism can be repositioned along the length of the column, allowing this stand to be used for various sized samples. The ES05’s small footprint makes it particularly well suited to crowded workbenches, while its low weight makes it very portable for field auditing or for quick transportation to other testing areas. Use the ES05 with Mark-10 force gauges and grips to create a complete testing solution.

Data Sheet  User's Guide  Stand Comparison Chart

Maximum force: 30 lbF [150 N] (compression only) Compatible with Mark-10 force gauges accessories and grips Maximum travel: 1.5" [38 mm] Spring-loaded lever operation is convenient for repetitive testing requirements Lever mechanism can be repositioned along the length of the column Mounting holes for bench mounting Compact size Optional base plate with threaded holes for fixture mounting Competitor force gauge mounting kits available

A wide range of force gauges and gripping fixtures Base plate >> Includes a matrix of #10-32 threaded holes and 5/16-18 center hole, and 5/16-18M to #10-32F adapter. Competitor force gauge mounting kits available << Eye End Adapters Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges.

Model	Description
ES05	Test stand, lever-operated, compression, 30 lbF
AC1060	Base plate with threaded holes

Trịnh Nguyễn Thanh Thủy 
===============================
[Hotline] + 84 1654 926 912

               + 84 91.663.5500
[email] thuy@songthanhcong.com

[Skype] thanhthuytxt

[Yahoo] thanhthuytxt92

ES30 - MANUAL TEST STAND - MARK-10 Vietnam

The ES30 Force Measurement Test Stand is a versatile and economical solution for most compression and tensile testing applications. It can accept a wide variety of sample shapes and sizes and can be configured in many positions due to modular design. Precision hand wheel operation enables the user to easily and accurately test up to 200 lbF [1 kN] of force. Use the ES30 with any Mark-10 force gauge and grips to create a complete testing solution.

Data Sheet  User's Guide  Stand Comparison Chart

Maximum force: 200 lbF [1 kN] Compatible with all Mark-10 force gauges, accessories andgrips Maximum travel: 13" [330 mm] Travel rate: 0.05" [1.27 mm]/hand wheel revolution Mounting holes for bench mounting Modular design: base may be removed and the stand may be used as part of a larger system. It also provides for alternative mounting Removable base plate with 25 #10-32 threaded holes for fixture mounting Competitor force

A wide range of force gauges and gripping fixtures Digital travel displays >> 6" [150 mm] and 12" [300 mm] travel models available, 0.0005" [0.01 mm] resolution, 0.001" [0.03 mm] accuracy, SPC output for automated data collection. For output of travel data to a PC, the following items are required: 09-1066 cable and MRS100A communication adapter. Note: continuous data output rate is limited to 2 Hz. Column extensions A spacer is supplied between the base and the column, increasing clearance between the force gauge and base (does not increase travel distance). Available in 6", 12", and 24", and custom lengths. Competitor force gauge mounting kits available << Eye End AdaptersAllow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges.

Mark-10 force gauges with data output include a USB cable, which can be connected directly to a PC.

If the ESM001 digital travel display option is ordered and connection to a PC is desired, the following connection cables are required:

Travel display (Mitutoyo) <=> 09-1066 cable, Mitutoyo <=> MRS100A converter, Mitutoyo to RS-232 <=> RSU100 converter, RS-232 to USB (optional)

Ordering information for these accessories can be found here. 

Model	Description
ES30	Test stand, hand wheel operated, 200 lbF
ESM001	Digital travel display, 6" x 0.0005 (150 mm x 0.01)
ESM004	Digital travel display, 12" x 0.0005 (300 mm x 0.01)
ESM003-1	Column extension for ESM/ES30, 6"
ESM003-2	Column extension for ESM/ES30, 12"
ESM003-3	Column extension for ESM/ES30, 24"

The ES30 is supplied with a tool kit, extension rod, small hook, medium hook, #10-32 coupler, and 2" dia. compression plate.

Trịnh Nguyễn Thanh Thủy 
===============================
[Hotline] + 84 1654 926 912

               + 84 91.663.5500
[email] thuy@songthanhcong.com

[Skype] thanhthuytxt

[Yahoo] thanhthuytxt92