- Selectable speed units of measurement (in/min & mm/min)
- LCD display with UP, DOWN, STOP, and emergency stop buttons and variable function keys
- Password protection of test parameters, to prevent unauthorized changes
- Integrated travel limit switches
- Removable fixture mounting plate with matrix of threaded holes
- Stepper motor-driven, produces 0% speed variation with load
- Mounting holes for bench mounting
- Unique mechanical design significantly reduces column bending
- Programmable UP and DOWN button functions - momentary motion, maintained motion, or auto
- A wide range of force gauges and gripping fixtures
- Multi-function cables, gauge to controller (09-1162)
Connects Series 7, 5 and Series 4 force gauges to the controller. This single cable is used to transmit set points, overload signals, and force data. - Serial cable, controller to PC (09-1056)
Sends force and travel data on a single cable via RS-232 to a PC. 
RS-232 to USB adapter (RSU100)- Bench mounting kit (ESM301-003)
Consists of a set of mounting adapters, and four sets of hardware with Allen key to accommodate surfaces of various thickness. Recommended when ordering column extensions. - Column extensions (ESM301-002-1, -2, -3)
A spacer is supplied between the base and the column, increasing clearance between the force gauge and base (does not increase travel distance). Available in 6" (150 mm), 12" (300 mm), and 24" (610 mm), and custom lengths. Bench mounting kit is recommended - Frame-Controller connection cables (09-1137, -1, -2, -3)
Permit the removal of test frame from controller for alternative mounting configurations. - Competitor force gauge mounting kits
- Eye End Adapters
Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges
Feature
|
Part No.
|
Description
|
Requirements
|
Travel indication
|
ESM301-001
ESM301L-001
|
Travel is indicated on the front panel, and an RS-232 port is supplied. Position indication is provided via an internal linear scale, producing significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated.
|
|
Computer control
|
EF010
|
A bi-directional RS-232 port is provided to interface with a PC. Users can write a custom program utilizing a library of ASCII commands or control the stand via a PC using legacy Nexygen TCD software (not available from Mark-10).
|
|
Programmable travel limits
|
EF011
|
The ESM301 can stop at or cycle between programmable upper and lower travel distances.
|
|
Overload protection
|
EF012
|
Protects a force gauge against overload. Program the desired percentage of full scale of the gauge. Adjustable analog output voltage setting allows the ESM301 to interface with virtually any gauge with analog output.
|
|
Auto Return
|
EF013
|
The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the other limit.
|
|
Cycling / dwell time
|
EF014
|
Same as auto-return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds.
|
|
Independent Up and Down Speeds
|
EF016
|
Configurable speeds for up and down directions.
|
-
|
Low Speed Extension
|
EF017
|
Extends the speed range to
0.02 - 13 in/min (0.5 - 330 mm/min).
|
-
|
High Speed Extension
|
EF018
|
Extends the speed range to
0.5 - 45 in/min (13 - 1100 mm/min).
|
-
|
Break Detection1
|
EF019
|
Crosshead stops at a sudden drop in force. Programmable percentage of peak force.
|
|
Load Holding1
|
EF020
|
Dynamically adjusts the crosshead position to maintain a programmed load for an indefinite or specified period of time.
|
|
Preload / Sample Touch
|
EF021
|
Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, compression, spring, elongation, and other applications. Preload is programmable as a percentage of force gauge full scale. Three modes: (1) stop, (2) stop and zero, and (3) zero without stopping.
|
|
Complete Options Package
|
Includes all Controller Features listed above
| ||
1. If enabling a feature in the field, ensure the test stand firmware version number is 2.0 or later. Firmware update may be done at the factory.
2. If using an older force gauge, ensure the firmware version number is 1.7 or later. Firmware update may be done at the factory.
- Load capacity:
300 lb (1.5 kN) @ up to 24 in/min (610 mm/min)
200 lb (1 kN) @ >24 in/min (610 mm/min) - Maximum travel distance:
ESM301: 11.5 in (292 mm)
ESM301L: 18 in (457 mm) - Speed range:
Standard: 0.5 - 13 in/min (13 - 330 mm/min)
Optional: 0.02 - 45 in/min (0.5 - 1100 mm/min) - Speed setting accuracy: ±0.2%
- Speed variation with load: ±0% (stepper motor driven)
- Travel accuracy: ±0.002 in (0.05 mm)
- Travel resolution: 0.001 in / 0.02 mm
- Limit switch repeatability: 0.001 in (0.03 mm)
- Power: Universal input 80-240 VAC, 50/60 Hz
- Weight:
ESM301: 34 lb (15.4 kg)
ESM301L: 39.5 lb (23.7 kg) - Warranty: 3 years (see individual statement for further details)
- CE mark
Model/Part No.
|
Description
|
US Price
|
ESM3011
|
Motorized test stand, 110V1
| |
ESM301L1
|
Motorized test stand, 110V1
| |
ESM301-002-1
|
Column extension, 6"
| |
ESM301-002-2
|
Column extension, 12"
| |
ESM301-002-3
|
Column extension, 24"
| |
ESM301-003
|
Bench mounting kit
| |
09-11622
|
Multi-function cable, Series 7/5/4 gauge to ESM3012
| |
09-10562
|
Serial cable, ESM301 to RS-2322
| |
RSU100
|
Communication adapter, RS-232 to USB
| |
09-1137
|
Connection cable, controller to test frame, 15" (included with stand)
| |
09-1137-1
|
Connection cable, controller to test frame, 22"
| |
09-1137-2
|
Connection cable, controller to test frame, 29"
| |
09-1137-3
|
Connection cable, controller to test frame, 39"
| |
Controller Options
| ||
ESM301-0013
|
Integrated travel indication with RS-232 output3 for ESM301
| |
ESM301L-0013
|
Integrated travel indication with RS-232 output3 for ESM301L
| |
EF010
|
Computer control via RS-232
| |
EF011
|
Programmable travel set points
| |
EF012
|
Integrated overload protection
| |
EF013
|
Auto return
| |
EF014
|
Cycling / dwell time
| |
EF016
|
Independent up and down speeds
| |
EF017
|
Extended speed range, low
| |
EF018
|
Extended speed range, high
| |
EF019
|
Break detection
| |
EF020
|
Load holding
| |
EF021
|
Preload / sample touch
| |
EFCOMP
|
Complete options package for ESM301
| |
EFCOMP-L
|
Complete options package for ESM301L
| |
EFCOMP and EFCOMP-L packages include all Controller Options listed above.
Prices are in addition to the test stand price. | ||
Notes:
1.
|
ESM301/ESM301L contains a universal power supply (80 - 240V) and includes a power cord with US plug. Add suffix ‘E’ for Euro plug, ‘U’ for UK plug, or 'A' for Australian plug. Ex: ESM301E, ESM301U, ESM301LA
|
2.
|
If force data output is required, and controller options requiring communication between the gauge and stand are ordered, both the 09-1162 and 09-1056 cables are required. If force vs. travel data output is required, both the above cables are also required. A USB converter is available. Compatible with Series 7/5/4 gauges (more info).
|
3.
|
Factory installation only. Can be retrofitted at a later date at the factory for $950.00 / $1,150.00 (ESM301 / ESM301L).
|
The ESM301/ESM301L is supplied with a small hook, medium hook, 2" diameter compression plate, extension rod, and #10-32 coupler.
| |
Model
|
A
|
B (Series 3/2)
|
C (Series 7/5/4)
|
ESM301
|
24.5 [622]
|
3.5 - 15.0 [89 - 381]
|
2.3 - 13.8 [58 - 351]
|
ESM301L
|
31.5 [800]
|
3.5 - 21.5 [89 - 546]
|
2.3 - 20.3 [58 - 516]
|
Trịnh Nguyễn Thanh Thủy
===============================
[Hotline] + 84 1654 926 912
===============================
[Hotline] + 84 1654 926 912
[Skype] thanhthuytxt
[Yahoo] thanhthuytxt92
Không có nhận xét nào:
Đăng nhận xét