SP-2496* - MARK-10 Vietnam - STC

TSTM-DC - ADVANCED MOTORIZED TORQUE TEST STAND - MARK-10 Vietnam - STC Vietnam

NEW!  - 200 lbFin (22 Nm) capacity upgrade now available - 4x extended speed range available The TSTM-DC Advanced Motorized Torque Test Stand offers all the mechanical specifications of the TSTM motorized test stand, including standard 100 lbFin (11.5 Nm) torque capacity, versatile modular design, quick engagement and disengagement of samples, fixture mounting plate, stepper motor design that prevents speed variation with load, and more. A 200 lbFin (22 Nm) capacity upgrade is available as an option. The TSTM-DC offers expanded capabilities, including full PC control, programmable angle limits, programmable cycling, auto return, password protection, and other features.

Maximum load: Standard: 100 lbFin [11.5 Nm] Optional: 200 lbFin [22.0 Nm] Speed range: Standard: 0.01 - 15 RPM [0.05 - 90°/s] Optional: 0.04 - 60 RPM [0.2 - 360°/s] * Speed accuracy: ±0.2% of setting, ±0% variation with load Digital display of angle Programmable angle limits Rotational travel accuracy: ±0.7° / 0.02 rev. Rotational travel repeatability: 0.1° / 0.01 rev. Rotational travel resolution: 0.1° / 0.01 rev. Throat: 4.10" [104 mm] Manual adjustment: 12° / adjustment knob rev Angle dial with 2° resolution Maximum slider travel: 15.5" [394 mm] Slider travel rate: 1.047" [26.6 mm] / lever rev Universal power supply: 80-250 VAC CE mark * Maximum torque decreases proportionately with speed. Examples: - Maximum torque at 60 RPM = 25 lbFin [2.8 Nm] - Maximum torque at 30 RPM = 50 lbFin [5.6 Nm]

Watch the Video:  Data Sheet  User's Guide - Controller  User's Guide - Stand   Stand Comparison Chart

• Computer Control
  An RS-232 port is provided to interface with a PC. A command set is provided to allow for full control from a PC.
  The following are required with PC control:
  - Model 7i or 5i force/torque indicator (more info)
  - 09-1162 multi-function cable (see below)
  - 09-1056 serial cable (see below)
• Digital Angle Indication
  Rotational travel is indicated in degrees or revolutions, with RS-232 output of angle data.
• Programmable Angle Limits
  The TSTM-DC can stop at or cycle between programmable upper and lower angle limits. Programmable in degrees or revolutions.
• Overload Protection
  Protects the torque sensor against overload (requires a Model 7i or 5i force/torque indicator and 09-1162 multi-function cable). The user programs the desired percentage of full scale of the sensor.
• Auto-return
  The torque table rotates to an angle limit or torque set point (requires a Model 7i or 5i force/torque indicator and 09-1162 cable), stops, and reverses direction at full speed to the other angle limit or torque set point.
• Cycling / Dwell Time
  Same as auto-return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds. Independent CW and CCW speeds may be programmed.
• Programmable Button Functions
  Programmable CW and CCW button functions - momentary motion, maintained motion, or auto.
• Independent CW and CCW Speeds
  Configurable speeds for CW and CCW directions

• Selectable speed units of measurement (RPM and °/s)


• Password protection
  Prevents unauthorized changes to controller settings.

Upgrade to 200 lbFin [22 Nm] capacity Upgrade to 60 RPM maximum speed Series R50 universal torque sensors Mount directly to the test stand. 6 capacities are available, from 10 ozFin to 100 lbFin [7 to 1,150 Ncm]. Model MR55-200 torque sensor - 200 lbFin [22 Nm] capacity. Mounts with an optional adapter.  Force/torque indicators Displays the torque value measured by the R50 sensor. Select from several models. Multi-function cable, indicator to controller  Connects an indicator to the controller. This single cable is used to transmit set points, overload signals, and torque data. Serial cable, controller to PC For communicating with a PC for data output and PC control.  RS-232 to USB adapter Converts RS-232 to USB output. Includes USB cable and installation CD. Column extension Column can be extended to custom lengths (see Ordering Information). Grips and attachments  A variety of grips and attachments are available. Axial compensator >>Allows for axial movement in threaded fasteners, bottle caps, and similar torque testing applications.

Model	Description	US Price
TSTM-DC	Torque stand, motorized, vertical, 110 V
TSTMH-DC	Torque stand, motorized, horizontal, 110V
SP-2496*	Upgrade to 200 lbFin capacity
SP-2624*	Upgrade speed range to 60 RPM max
09-1162	Multi-function cable, 7i/5i indicator to test stand
09-1056	Serial cable, test stand to PC
RSU100	Communication adapter, RS-232 to USB
TSF002	Horiz. / wall mounting kit
AC1016	Mounting adapter, MR55-200 to test stand
---	Column extension

* These two upgrades cannot be ordered simultaneously

The TSTM-DC contains a universal power supply (80 - 240V) and includes a 110V US power cord. Add suffix ‘E’ for Euro cord, ‘U’ for UK cord, or 'A' for Australian cord.

Ex: TSTM-DCE, TSTM-DCU, TSTMH-DCA

The TSTM-DC / TSTMH-DC is supplied with a tool kit.

TSTM

TSTMH

CONTROLLER

Trịnh Nguyễn Thanh Thủy 
===============================
[Hotline] + 01654 926 912

              + 0125 343 0260
[email] thuy@songthanhcong.com

[Skype] thanhthuytxt

[Yahoo] thanhthuytxt92