MARK-10 Vietnam - STC Vietnam: AC1036 - CALIBRATION KIT FOR CAP TORQUE TESTERS - MARK-10 Vietnam

Thứ Tư, 24 tháng 12, 2014

AC1036 - CALIBRATION KIT FOR CAP TORQUE TESTERS - MARK-10 Vietnam - STC Vietnam

User's Guide

This calibration kit is designed to permit the field calibration of any Series TT01 torque tester or certain Series R53 torque sensors, as well as legacy Series CTA, STB, and STBA. The kit contains a complete set of attachments required to mount the tester to a bench, as well as the necessary brackets and cable to mount weights, as follows:

Right-angle bench mounting bracket
Cable with looped ends
Attachment, cable to torque tester
Set of hardware

Note: Weights are not available from Mark-10. Suggested source for calibration weights:
Rice Lake Weighing Systems - www.ricelake.com

Refer to the instrument's user's guide for complete calibration instructions (click here). If using English weights, the following weight combinations are recommended to achieve full scale:

MTT01-12 / MR53-12 / CTA12 / STB(A)12:
3.6 lb, as follows:
1 lb hanger weight- qty. 1
2 lb slotted weight - qty. 1
0.5 lb weight - qty. 1
0.1 lb weight - qty. 1

MTT01-25:
7.5 lb, as follows:
1 lb hanger weight- qty. 1
5 lb slotted weight - qty. 1
1 lb slotted weight - qty. 1
0.5 lb weight - qty. 1

MTT01-50 / MR53-50 / CTA50 / STB(A)50:
15 lb, as follows:
1 lb hanger weight- qty. 1
10 lb slotted weight - qty. 1
2 lb slotted weight - qty. 2

MTT01-100 / MR53-100 / CTA100 / STB(A)100:
30 lb, as follows:
1 lb hanger weight- qty. 1
20 lb slotted weight - qty. 1
5 lb slotted weight - qty. 1
2 lb slotted weight - qty. 2