WT3-200 - WIRE CRIMP PULL TESTER - MARK-10 Vietnam - STC Vietnam

Watch the Video:  Data Sheet  User's Guide

The WT3-200 wire crimp pull tester is designed to measure the pull-off force of crimped wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1,000 N) of crimp pull force. Adjustable wire terminal grip contains multiple slots for wire diameters up to AWG 3 (0.25 in [6.3 mm]). A large, backlit graphic LCD displays easy-to-read values, including real-time force, peak force, programmable pass/fail limits, units of measurement, and more. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. An analog load bar is shown on the display for graphical representation of applied force. On-board data storage for up to 1,000 readings is included, as are statistical calculations and output to a PC. Unique automatic output / data storage / zeroing upon sample break helps automate testing processes. An optional ring terminal fixture may be used to secure ring terminations, and an optional carrying case makes transportation simple and safe.

Measures real-time and peak force values Ergonomic lever operation produces 200 lbF [1,000 N] USB, RS-232, Mitutoyo (Digimatic), and analog outputs Automatic output / data storage / zeroing upon sample break helps automate testing processes 1,000-point data memory with statistics and outputs Password protection prevents unauthorized changes Programmable set point indicators and outputs for pass/ fail determination High-speed 7,000 Hz sampling rate accurately captures peak force values Configurable audio alarms and key tones Mounting holes for bench mounting CE mark Capacity x Resolution:  200 x 0.1 lbF, 3200 x 2 ozF, 100 x 0.05 kgF, 1000 x 0.5 N, 1 x 0.0005 kN Accuracy:  ±0.2% of full scale Wire gauge range*: AWG30 - AWG3* Wire diameter range: 0.01 - 0.25 in [0.3 - 6.3 mm] Sample length range: Minimum 7.50 in [191.0 mm], excluding termination, unlimited length Maximum sample elongation: 1.15 in [29.2 mm] Power: AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low. Battery Life: Backlight on: up to 7 hours of continuous use Backlight off: up to 24 hours of continuous use Sampling rate: 7,000 Hz Outputs: USB / RS-232: Configurable up to 115,200 baud. Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible Devices. Analog: ±1 VCD, ±0.25% of full scale at capacity. Set points: Three open drain lines. Safe overload: 150% of full scale (display shows “OVER” at 110% and above) Weight: 16.0 lb [7.3 kg] Included items: Universal voltage AC adapter, battery, quick-start guide, USB cable, resource CD (USB driver, MESURTMLite software, MESURTMgauge DEMO software, and user's guide), NIST-traceable certificate of calibration Warranty: 3 years (see individual statement for further details)

* Including insulation. To ensure the wire sample will fit into the WT3-200, measure the overall outside diameter of the insulated wire and check against the specified diameter range.

^ WT3002 ^ WT3003 ^ 15-1004

Ring terminal fixture << Multiple pin sizes are provided, from 1/8" to 3/8" [3.2 to 9.5 mm] dia. Carrying case >> Provides storage space for the WT3-200 tester, optional ring terminal fixture, AC adapter, USB cable, and accessories. Machinable blank terminal fixture << For unique sample shapes and sizes.  << MESURgauge Software - tabulates and plots force vs. time. Also calculates statistics, exports to Excel, and more. More info... >> Calibration kit Complete set of brackets and hardware for calibration of a WT3-200. Weights not available from Mark-10. More info...

^ WT3001 ^ AC1049

Model	Description
WT3-200	Wire terminal tester, 200 lbF, 110V
WT3-200E	Wire terminal tester, 200 lbF, 220V EUR
WT3-200U	Wire terminal tester, 200 lbF, 220V UK
WT3-200A	Wire terminal tester, 200 lbF, 220V AUS

Additional Items to Consider
CERT	Certificate of calibration with data
15-1004	MESURTMgauge software
WT3001	Carrying case for WT3-200
WT3002	Ring terminal fixture for WT3-200
WT3003	Machinable blank terminal fixture
AC1049	Calibration kit for WT3-200 (weights not included)
09-1163	Cable, WT3-200 to RS-232
09-1165	Spare USB cable
08-1026	Spare rechargeable battery
AC1030	Spare AC adapter, 110V
AC1031	Spare AC adapter, 220V EUR
AC1032	Spare AC adapter, 220V UK
AC1035	Spare AC adapter, 220V AUS

IN [MM]

Trịnh Nguyễn Thanh Thủy
===============================
[Hotline] + 84 1654 926 912

               + 84 91.663.5500
[email] thuy@songthanhcong.com

[Skype] thanhthuytxt

[Yahoo] thanhthuytxt92