MARK-10 Vietnam - STC Vietnam: ES10 - MANUAL TEST STAND - MARK-10 Vietnam

Thứ Hai, 22 tháng 12, 2014

ES10 - MANUAL TEST STAND - MARK-10 Vietnam - STC Vietnam

The ES10 and ES20 manual test stands are compact and economical solutions for compression and tensile testing of small samples. Choose between a lever (ES10) for quick-action testing or a hand wheel (ES20) for more precise testing with greater consistency in testing results. Optional dial and digital indicator kits display up to 1" (25 mm) of displacement. Use these stands with force gauges and grips to create complete and economical testing systems.

ES20 ES10

Data Sheet

User's Guide

Stand Comparison Chart

Small size
Compatible with all Mark-10 force gauges, accessories and grips
Mounting holes for bench mounting
Large base plate with 5 #10-32 UNF holes for fixture mounting

Competitor force gauge mounting kits available

	ES10	ES20
Maximum Force	100 lbF [500 N]
Maximum Travel	9" [229 mm]
Loading Method	Lever (can be placed in 3 positions for ease of operation)	Top-mounted hand wheel
Travel Rate	1.050" [26.7 mm] / lever rev.	0.083" [2.1 mm] / wheel rev.
Weight	10 lb [4.5 kg]

	A wide range of force gauges and gripping fixtures Base plate >> Includes a matrix of #10-32 threaded holes and 5/16-18 center hole, and 5/16-18M to #10-32F adapter. Dial indicator kit << (top) Displays up to 1" of displacement with resolution of 0.001" Digital indicator kit << (bottom) Displays up to 1" / 25 mm of displacement with resolution of 0.0005" / 0.01 mm. Includes zero button and in/mm selector button. Brackets for indicator Brackets are provided only, without indicator, for cases where a customer-supplied indicator is preferred. Competitor force gauge mounting kits available Eye End Adapters >> Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges.

Model	Description
ES10	Test stand, lever-operated, 100 lbF
ES20	Test stand, hand wheel operated, 100 lbF
ES001	Dial indicator kit, 1" travel, brackets included
ES002	Digital indicator kit, 1" / 25 mm travel, brackets included
ES001NI	Set of brackets for indicator, indicator not included
AC1060	Base plate with threaded holes
G1039*	Coupler, #10-32

* When ordering an ES10 or ES20 test stand with a Series MG force gauge with 20 lbF (100 N) or lower capacity force gauge and most Mark-10 grips, the G1039 coupler or any length extension rod is required in order to provide adequate clearance between the load cell shaft and the grip. MG50 and higher capacity force gauges include a G1039 coupler.