TSA750 - MANUAL TEST STAND - MARK-10 Vietnam - STC Vietnam

The lever operated Force Measurement Test Stand Model TSA750 is a perfect solution for quick-action pull testing and compression testing of up to 750 lbF (3.75 kN) of tensile or compressive force. Made of rugged, machined aluminum components, this test stand is durable enough for the factory floor, yet precise enough for laboratory environments. The test stand includes adjustable travel stops and a frictional low force brake. Available in vertical and horizontal orientations.  Data Sheet  User's Guide  Stand Comparison Chart

Maximum force: 750 lbF [3.75 kN] Maximum travel, with stops: 3.75" [95 mm] Maximum travel, without stops: 6" [152 mm] Travel rate: 3" [76.2 mm]/lever revolution Compatible with all Mark-10 force gauges,accessories and grips Loading lever can be positioned in 30° increments for ease of operation Threaded holes for bench mounting Adjustable travel stops Precision ground rack and pinion mechanism Adjustable wear plates for smooth, precise motion Optional digital travel display Friction brake

A wide range of force gauges and gripping fixtures Digital travel display >> 6" [150 mm] travel, 0.0005" [0.01 mm] resolution, SPC output for automated data collection. For output of travel data to a PC, the following items are required: 09-1066 cable and MRS100A communication adapter. Note: continuous data output rate is limited to 2 Hz. Horizontal / wall mounting kit Set of mounting legs that attach to the test stand column in place of the base. Column extension Column can be extended to custom lengths (see Ordering Information) Mounting table kit Contains a matrix tapped holes for grip and fixture mounting << Eye End Adapters Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges

Mark-10 force gauges with data output include a USB cable, which can be connected directly to a PC.

If the TSA001 digital travel display option is ordered and connection to a PC is desired, the following connection cables are required:

Travel display (Mitutoyo) <=> 09-1066 cable, Mitutoyo <=> MRS100A converter, Mitutoyo to RS-232 <=> RSU100 converter, RS-232 to USB (optional)

Ordering information for these accessories can be found here.

Model	Description
TSA750	Test stand, lever-operated, 750 lbF, vertical
TSA750H	Test stand, lever-operated, 750 lbF, horizontal
TSA001	Digital travel display for TSA750/TSA750H
TSA002	Horizontal/wall mounting kit for TSA750/TSC1000
TSA003	Mounting table kit for TSA750/TSA750H
AC1004	Mounting kit, Indicator to TS-Series test stands
---	Column extension

The TSA750 / TSA750H is supplied with a tool kit, medium hook, large hook, and a 2" diameter compression plate.

TSA750

TSA750H

Trịnh Nguyễn Thanh Thủy
===============================
[Hotline] + 84 1654 926 912

               + 84 91.663.5500
[email] thuy@songthanhcong.com

[Skype] thanhthuytxt

[Yahoo] thanhthuytxt92